TOPIC:

I downloaded these yesterday and ran them some today. Every time in the corners the car would down shift. Didnt matter what I tried the same results. Upon investigation I found that the change down parms are out of wack in the parms file. the original line read 0.0 6000 5700 5800 so I changed it to 0.0 3500 4000 4500. It solved the problem. I do not race online. I thought I would let the programmers know if this was a mistake or what. Good luck racing!

Steve

These cars were made for Automatic Tranny racers to be more competetive. The auto is mostly .2 slower than the manny's, but these cars have made the auto faster, in which the cars are made to shift at minimal output of 2nd gear to reach maximum output to engine, to which that leaves out error of driver shifting in turn making you faster. The auto guys were having problems in which no matter what they did, the car was always .2 slower than the manny racers.If you don't run auto then it's the same as any other car, but if you do, your now in the hunt! So what I am trying to say is, this is pretty much showing you where you should be shifting, almost a teaching/racing car, if you wanna look at it that way.

i think flyer made them that way here some more settings to try
offline only
GEAR SETTINGS

change down = {0.0, 3000.0, 3500.0, 5500.0} 3 SPEED
change up = {5500.0, 6600.0, 997300.0, 1000000.0}

change down = {0.0, 3000.0, 5200.0, 6800.0} 4 SPEED
change up = {5500.0, 7000.0, 7400.0, 7800.0}

change down = {0.0, 3500.0, 4500.0, 5500.0}
change up = {6900.0, 7100.0, 7300.0, 1000000.0} 4 speed from leadfoot & dtr

---

change down = {0.0, 3500.0, 4500.0, 5500.0}
change up = {996900.0, 997100.0, 997300.0, 1000000.0} 4 speed from dtrsc
THIS WILL NOT SHIFT OUT OF 1ST GEAR

---

change down = {0.0, 3000.0, 5200.0, 6800.0}
change up = {5500.0, 7000.0, 7400.0, 7800.0} FOR XXR LATE MODEL


change down = {0.0, 3000.0, 5000.0, 6000.0}
change up = {6800.0, 6800.0, 7200.0, 7600.0} FOR Nitro Truck FOR DTR


change down = {0.0, 3500.0, 4500.0, 5500.0}
change up = {6900.0, 7100.0, 7300.0, 1000000.0} FOR POWER SLIDE



;UK-Dirt BriSCA F1 Chassis
change down = {0.0, 3000.0, 3500.0, 4500.0} 4 SPEED
change up = {5500.0, 6600.0, 6000.0, 6000.0}

change down = {0.0, 3000.0, 4500.0, 5500.0}
change up = {5500.0, 997100.0, 997300.0, 1000000.0}

change down = {0.0, 6000.0, 5700.0, 5800.0}
change up = {7500.0, 11500.1, 13500.2, 14500.3}